The underfloor heating system step by step. Practical tips for small expenses
The underfloor heating system has become popular in London, especially in new houses designed to have a much lower energy consumption.
The owners of buildings which are suited to the underfloor heating system need to understand that not every house can be suited for the underfloor heating system. To understand how this system works, the owner has to find a specialist to advise him about the underfloor heating system step by step.
A first step is the need for investment. The owner has to make an account to see if the amount of money and work invested will be amortized by the heating costs. The specialists say that this underfloor heating system saves between 20 and 40% each winter, depending on the insulation of the building in which it is installed.
In order not to misuse or install the system in vain, the owners must follow step-by-step the underfloor heating instructions. Some experts in underfloor heating systems say that for any new or old house it is very important to be well isolated, both the walls and the windows, but also the roof. The thermo insulation of the roof should be treated with paramount importance because it loses the highest amount of heat.
The underfloor heating system
The easiest task is for those who are thinking of installing a underfloor heating system in a new house. Here the specialists can directly make calculations so that they can implement without problems the underfloor heating system step by step. After the decision of the underfloor heating system , electric or thermal heating system, is decided by the owner, he should contact the specialist who calculates the thickness of the screed that is placed over the system which is fixed with special materials on the floor.
Those who installed such systems say it would ideally be casting a 4.5 centimeter screed, but it can also pour up to seven centimeters, but in this case the heating is done harder. In the case of classical centrals, the distribution of cold and hot water in the sanitary installation must be completed before the underfloor heating system installation is completed. We need to consider the quota of the underfloor heating.
After these preliminary operations, it is necessary to determine the place of the source that will heat the floor and follow the distribution of the columns that will be under the floor or under the flooring tiles. Here is a need for a specialized workforce so that the system is effective. The specialists also show how to calculate the materials for the underfloor heating system installation.
To calculate the need for pipe for one level proceed as follows: At 30 sq m of flooring tiles there are 210 ml of pipe. At 60 sq m of hardwood flooring there is a 600 ml pipe requirement, 12 sq m of hung area requires 240 ml of pipe. For 23 square meters of garage it takes 115 ml of pipe. This results in a total of 1165 ml of pipe, calculated on the ground floor of a decent house. One of the most used systems in London is electrical.
They mainly found in houses, mostly new constructions, where the installation of a high-powered electrical system is considered from the start. In the old block apartments, installing the underfloor heating system is much more difficult, even impossible, due to the lack of high power electrical circuits.