The best thermal insulation

Service Description

The best thermal insulation

The best thermal insulation is primarily conditioned by the prices. As the heating bills increase, we realize how important it is for the house where we stay to have the best thermal insulation. What is the best thermal insulation, both for indoor and outdoor insulation, you will find from the following material.

The reasons why the internal insulation with polystyrene is indicated:

More and more thermal insulation materials have appeared on the UK market in the recent years, but there are few who know what the differences between them and the advantages of different materials are. “The insulation with polystyrene is not indicated because, due to a technical calculation, the dew point drops inside, which means the appearance of dampness. In addition, it has been found out that the insulation with polystyrene inside the house takes in time to depolymerize the polystyrene, which is carcinogenic for those who live in the house. “The question is how we proceed when the outer insulation is impossible. How do we isolate only a block apartment, a house that is considered a national patrimony or a separate room in the apartment? “If you decide for an indoor thermal insulation, you should take care to isolate all the exterior walls, the ceiling and the floor if you are bordered by unheated or warmer spaces. One of the variants is to insulate the inside with mineral wool and plasterboard. The risk of dampness should not be neglected, as the wall will no longer breathe and the condensation between the wall and the insulation will form, which in turn leads to mold formation. In this case there are variants of the last generation, but rather expensive, or the polyurethane foam insulation. ”

Why the thermal insulation with mineral glass wool is very advantageous

Compared with the internal thermal insulation, the external thermal insulation is much more widespread and more advantageous.

Here are the main types of insulation:

– The cellulose fiber insulation – because of its production mode it is considered to be an eco-insulation. The cellulose fibers used in insulation are produced from newspaper paper.

– The expanded polystyrene – its fairly low cost, and ease of use have made it very popular. “The expanded polystyrene can also be used to straighten the walls of old buildings, offering good thermal insulation. It is easy to use and can be applied without too much work, ” a specialist told us. The extruded polystyrene is also used for external thermal insulation, because it is strong enough and has an increased resistance to infiltration.

Very advantageous is the mineral glass wool or mineral basal wool. Here are the advantages of the two types of mineral wool. “Both mineral glass wool and basalt mineral wool work on the same principle – the air is captured in the hollows to reduce the thermal conductivity from one surface to the next. They are easy to install on the walls and lofts and represent the most cost-effective insulation solution on the market. The insulating properties of the glass wool results from its technology by including a very large volume of air between the continuous fibers of the material, air that is prevented from circulating freely. It is ideal, for example, for isolating the attics. “Compared with other building materials, the mineral wool products have a very low thermal conductivity, resistance to moisture or condensation, a stable structure over time and resistance to aging. It also ensures good ventilation, does not retain the water and does not favor the development of microorganisms.